1999-2009 [Subscribe to Daily Digest] |
![]() | [Main 95 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Location Posted by Herb Hirsch [Email] ![]() ![]() ![]() In Reply to: Oil pressure sender location (pic), Paul in NM, Fri, 29 Jan 2010 11:30:43 Members do not see ads below this line. - Help Keep This Site Online - Signup |
First, I am assuming that you are referring to the 4 cylinder engine, not the V6.
The picture you have included shows the front side of the block closest to the front of the car/radiator. This is the side with the exhaust manifold attached to the head.
The oil pressure sender is located on the back side of the block, the side closest to the firewall, underneath the intake manifold, between cylinders 3 and 4, and by the side of the starter. It can be identified by the single yellow wire sticking out. 6"-8" from the sensor is a connector with the other end of the yellow wire going into it.
Replacement is not difficult. However, it is necessary to move the starter out of the way.
Herb Hirsch
South Brunswick, NJ
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |