![]() |
1979-1993 & 94 Conv [Subscribe to Daily Digest] |
![]() | [Main C900 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Worn clutch if.......................... Posted by DougM [Email] ![]() ![]() ![]() In Reply to: Black collar around the slave is supposed to be used, DougM ![]() ![]() |
If the plastic sleave is less then 2mm from the turned surface then the clutch is worn. If that plastic sleave is way toward the front of the car then worn.
The other design inspection is as follws.
1) diengage the clutch and release the pedal. The release bearing will then be in contact with the fingers of the pressure plate.
2) Through the inspection hole, Check that the sliding lock ring on the piston in the slave cylinder is in contact with the cylinder walls.
3) Check the distance between thhe sliding lock ring and the lock ring behind the release bearing. If less than 2mm then the clutch is worn.
I got all this right from SAAB. I hope it helps someone. Some of it sounds confusing, but maybe by looking through the hole it will be self explanatory.
posted by 24.51.7...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |