1979-1993 & 94 Conv [Subscribe to Daily Digest] |
![]() | [Main C900 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: fitting sway bars to an 85 SPG Posted by Justin VanAbrahams [Email] ![]() ![]() In Reply to: fitting sway bars to an 85 SPG, Jo K, Thu, 4 Oct 2001 16:47:39 Members do not see ads below this line. - Help Keep This Site Online - Signup |
I don't know if you have them or not - but I think you do. If not, fitting them should be pretty easy. The rear is a snap to install - just support the rear axle, unbolt the forward bolt on the trailing link and the rear bolt on the trailing link, slip in the swaybar, and put it back together. You will need the longer bolts for a swaybar equipped car, so if you go the junkyard route make sure you keep the hardware! The front may be a little more difficult, depending on whether your car is pre-drilled for the swaybars. My '86 900S was, and I believe all cars after '84 were but I am not sure. Assuming that's the case, mount in the inner brackets, mount the out endlinks to the a-arm, slide in the swaybar and bolt it down. You don't need a lift to do either, but it certainly helps. If you require drilling, you may need to remove the power steering rack to do so but I am not sure.
-Justin
posted by 64.164.3...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |