1979-1993 & 94 Conv [Subscribe to Daily Digest] |
[Main C900 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: Trying to unplug knock sensor cable... Posted by RS [Email] (#15) [Profile/Gallery] (more from RS) on Fri, 10 Oct 2003 11:07:48 In Reply to: Trying to unplug knock sensor cable..., Aris, Fri, 10 Oct 2003 11:01:37 Members do not see ads below this line. - Help Keep This Site Online - Signup |
Put a 10-mm socket (some of them may be 12-mm) on an extension and take off the bolt that holds the sensor. If it's a turbo, you will have to push the Y fitting on the large PCV hose aside to get to the bolt.
Reach under the side of the intake manifold and pull the sensor away from the block. It's greasy and dirty on the underside of the manifold, so be prepared. If you have thin hands, you may be able to pull out the sensor from between the intake runners.
Other people may have had success trying to take the connector off the sensor with it attached, but I always have to remove the sensor.
posted by 63.148.1...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.