1979-1993 & 94 Conv [Subscribe to Daily Digest] |
![]() | [Main C900 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: Tranny ID/compatibility Posted by RS [Email] ![]() ![]() ![]() In Reply to: Tranny ID/compatibility, Mitja Jaksa, Tue, 2 Dec 2003 23:49:28 Members do not see ads below this line. - Help Keep This Site Online - Signup |
Prices at junkyards can be $50 US on upwards. Usually they're in the $250 to $500 range. I had gotten a decent 5-speed for $50 from a pick-n-pull. It only took me 4 hours to get it out (most of that was spent pushing the large A-frame to the car over loose gravel and getting water to drink).
If the transmission is from a 16-valve car, it probably has the larger inner drivers. IIRC, the car you're going to be putting it into is a carburetted 8-valve.
If the drivers are different, you can swap the drivers from your old transmission into the new one. But - you have to press the driver out and install the replacement driver into the same bearing carrier. This will keep the ring gear properly aligned with the pinion gear.
According to Jeff & Royces transmission info page, it came from a 1986 turbo, so it will have the larger inner drivers.
posted by 63.148.1...
http://www.twinsaabs.com/tranny/tranny_info.html
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |