1979-1993 & 94 Conv [Subscribe to Daily Digest] |
[Main C900 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Whatcha need to do is ... Posted by RS [Email] (#15) [Profile/Gallery] (more from RS) on Thu, 19 Feb 2004 05:32:04 In Reply to: Replacing door latch - help, jimtimkim, Thu, 19 Feb 2004 00:50:45 Members do not see ads below this line. - Help Keep This Site Online - Signup |
First - Remove the window. That gives you a little better fiew of what's in there and gives you som much-needed accessibility.
Remove the inner door handle and the rod that goes back to the latch mechanism. You'll need to unclip the back end of the rod from the latch.
Remove the screw to the front of the door handle from the inside.
Remove the screws holding the automatic lock microswitch and get that out of the way.
Remove the screw for the back of the door handle and remove the handle. IIRC, you have to rotate the drivers side door handle CCW to remove it.
Remove the two screws that hold the latch mechanism in place from the back of the door.
You should be able to drop the latch and get it out past the window U channel then.
I've taken several of them out, and have to relearn the final path for getting them out past the window channel each time.
posted by 63.148.1...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.