1979-1993 & 94 Conv [Subscribe to Daily Digest] |
![]() | [Main C900 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
You are looking at the wrong ones. Posted by SWEDECAR [Email] ![]() ![]() ![]() In Reply to: Swede, the bolts I am looking at are...., Chaz, Mon, 13 Sep 2004 18:06:59 Members do not see ads below this line. - Help Keep This Site Online - Signup |
Ok, let me list ALL fasteners on the left hydraulic motor mount.
4 M8 bolts with 12mm head goes through the motor mount bracket and into the engine block (impossible to remove without some disassemblying).
2 M10 bolts with 14mm head and welded square nut goes from under and up in through the motormount and brackets ("impossible" to reach one of them).
2 M8 studs with 13mm nuts under the motor mount bracket holds the motor mount bracket to car body (easy to reach from under the car and with 13mm wobble socket with swiwel extensioner).
1 M12 motor mount stud with 19mm nut that you can't reach until everything else is taken apart.
AND THAN, you have 2 bolts with 14mm head that goes through the 2 parts of motor mount bracket from for to aft of the car (very easy to remove from above).
Ok, that's all the help I can give you.
Anders
posted by 66.229.13...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |