1979-1993 & 94 Conv [Subscribe to Daily Digest] |
![]() | [Main C900 Bulletin Board | BBFAQ |
Prev by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Little help re: clutch assy removal Posted by nateh89spg [Email] ![]() ![]() |
Attempting my first clutch/slave r&r on my 88 spg. All bolts (6) have been removed that hold the pressure plate to the flywheel. Special tool is in place. I'm experiencing a bit of difficultly removing the assy (slave, pressure plate, TO bearing and disc) from the flywheel. Input shaft is out as far as it can be and the slave is loose (I can rotate it by hand). Looks like there are locating pins on the flywheel which means I will have to pull the pp toward the radiator to get it "up and around" the pins.
Of course, the Bentley just says to remove them all together.
Can I pry (B.F. Removal)between the pp and flywheel (am going to have it resurfaced anyway) or (from previous posts) break out the dremel to cut the fingers.
Thanks in Advance,
Nate
posted by 68.118.235...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |