1979-1993 & 94 Conv [Subscribe to Daily Digest] |
[Main C900 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: How much labor to swap 3-gauge cluster? Posted by CBS [Email] (#969) [Profile/Gallery] (more from CBS) on Tue, 4 Sep 2007 12:44:59 In Reply to: Re: How much labor to swap 3-gauge cluster?, Brownie, Tue, 4 Sep 2007 11:32:11 Members do not see ads below this line. - Help Keep This Site Online - Signup |
Maybe I am being a little too much of a kitty about doing this myself. I just tracked the wire bundle(s) accross the bottom of the steering column(where I just spent a couple sweaty days rigging a makeshift brake CC switch holder) and I decided I wanted no part in it. But if the going thought is that it is a fairly simple DIY, then maybe I will consider that. A couple hours for an indie, say about $200, would probably be worth it to me.
The gauges in the center console are L-R Volt, PSI, and Outside Temp. I found the temp gauge is actually pretty accurate. Against a calibrated Vaisala gauge it was about 1.5 degrees high at least between 40-70 degree outside range. I think the oil pressure sender is attached next to the oil filter housing...but I could be wrong (now you see why this looks intimidating to me).
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.