1979-1993 & 94 Conv [Subscribe to Daily Digest] |
[Main C900 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
wiring for car alarm and remote start Posted by Saabu [Email] (#1133) [Profile/Gallery] (more from Saabu) on Sun, 18 May 2008 07:59:04 Members do not see ads below this line. - Help Keep This Site Online - Signup |
this old 91 has an alarm and remote start (the remote start seems to be installed quite nicely so i'm assuming that its factory install).
anyway, i am not planning to use either the alarm or the remote start, and i'd like to eliminate the wiring to reduce confusion.
here's the wiring i see:
from remote start harness:
purple wire from ignition changing to yellow, going thru firwall to the coil.
red wire going to car alarm via firewall. origin somewhere under dash.
Green wire from dash going via firewall and spliced to a brown wire, ending up at some sort of hood-opening detector on the rad support, drivers side.
Grey wire from ignition changing to brown, going thru firewall and splicing to above green wire.
should i cut all wires except the yellow coil wire?
any suggestions on eliminating wiring much appreciated. i have no experience wiring either car alarms, remote starts or reading wiring diagrams.
thanks in advance,
Wayne in Calgary
posted by 75.153.17...
_______________________________________ 1988 900 TC 2000 Viggen 1997 900 TC son has 2002 9-3 SET
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.