1979-1993 & 94 Conv [Subscribe to Daily Digest] |
![]() | [Main C900 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: Pressing out pinion bearing... Posted by CMyles [Email] ![]() ![]() In Reply to: Pressing out pinion bearing..., Austin Underwood, Tue, 14 Oct 2008 10:25:19 Members do not see ads below this line. - Help Keep This Site Online - Signup |
AU,
After removing the big nut stand the shaft so that the gear end is down and the threaded end is up and press the shaft downward while supporting the housing. With the proper Saab press tools you'll press the rear bearing off of the shaft when you do this, otherwise you'll have to remove it after the shaft is out of the housing. You just need a punch and hammer to knock the outer races from the housing. To seat the new outer races you can make a tool by grinding down the OD of the old races a little. Be sure that when you press the new rear bearing on the shaft that you only press on the inner rim and not the roller cage. Cheers
posted by 198.233....
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |