1979-1993 & 94 Conv [Subscribe to Daily Digest] |
[Main C900 Bulletin Board | BBFAQ |
Prev by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: More vague memories Posted by Roger D [Email] (#1121) [Profile/Gallery] (more from Roger D) on Sat, 27 Dec 2008 14:16:36 In Reply to: Re: Vacuum Connection for HVAC system, fred, Sat, 27 Dec 2008 10:27:11 Members do not see ads below this line. - Help Keep This Site Online - Signup |
I believe the feed line from the white cannister goes to the firewall and connects to a metal nipple. Next to where it goes thru the firewall there is an unused 2nd nipple that has a cap on it. The feed line metal nipple goes thru the firewall under the glove box. There are several lines under the dash area that go to servos. I have found most of there lines disconnected in various cars. I think the knee bolster needs to come off to get the best access to several lines. This would give you access to check the clip on the main vacuum multiplug. Altenatively you might get to the floor flap servos by just bending down the black plastic air plenums. The main vacuum multiplug can be also accessed by pulling the radio and DIN cage.
posted by 71.193.23...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.