1985-1998 [Subscribe to Daily Digest] |
[Main 9000 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: 9000 not starting Posted by Joe [Email] (#444) [Profile/Gallery] (more from Joe) on Thu, 7 Feb 2002 19:00:30 In Reply to: 9000 not starting, jack, Wed, 6 Feb 2002 19:30:18 Members do not see ads below this line. - Help Keep This Site Online - Signup |
Could be the crank sensor. Not sure were it is on your car. If you have DI it is on the front of the engine behind the crank pully. If you have a normal distributer it is on the distributer. Either way you can check it the same way. It will have 3 wires coming out of it. Follow it to a connector. Disconnect and on the wiring harness side not the sensor side. Jump the 2 outer wires. Then make a little extention for the cener wire. Tap the center wire on a grounded portion of the engine and see if you now get spark with your spark tester. If you do you need a crank sensor.
posted by 64.12.10...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.