1985-1998 [Subscribe to Daily Digest] |
![]() | [Main 9000 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: recirculator flap motor stuck? Posted by Ari [Email] ![]() ![]() In Reply to: recirculator flap motor stuck?, df, Thu, 16 Jan 2003 10:04:25 Members do not see ads below this line. - Help Keep This Site Online - Signup |
I agree with Eric. If things are bound up, there will be a lot of force on the servo shaft. Pulling the servo straight back will usually work.
There is a good chance the servo will work fine once removed. Also, it's possible that the servo has gotten out of alignment. The servo is a small electric motor driving through a gear train. There is a potentiomenter (variable resistor) that measures the position of the output shaft. I did a post a few years back on how to disassemble the servo and re-align the potentiometer.
The same servo is used in three places for the ACC - recirculation flap, mixture flap, and vent/defrost. The mixture /vent/defrost are on a bracket. I bought a bracket with two servos from Goldwing a few years back for about $100. So used ones aren't that expensive.
posted by 192.249....
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |