1985-1998 [Subscribe to Daily Digest] |
![]() | [Main 9000 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: Fuel rail? Posted by Michael [Email] ![]() ![]() In Reply to: Fuel rail?, Joe98, Mon, 14 Nov 2005 08:25:56 Members do not see ads below this line. - Help Keep This Site Online - Signup |
Joe:
I replaced thinsg because it was time. Also had a bad overheat issue last month... Replaced the waterpump, thermostat and hoses. When I took out the old Waterpump there was some plastic wound up in the propeller... still not sure where that came from. That certainly was a cause in the overheat.
As far as the idle... shes idling fine. Its more so when driving and coming to a stop that she vibrates, drops in idle and then shifts back to normal.
So more of my concern is the vibration issue (yes I need to replace the upper rubber mounts, their shot. The lower mounts I have to inspect so I have no idea if they are gone or not.) When she is idling the tensioner pulley and shock is vibrating alot. I think thats more my concern. When driving thats whats vibrating when I slow down to a stop, Im sure of that.
I believe its more than the mounts causing this.
I should also mention that when I pulled out the DI Cassette, the shaft that runs down to cylinder #4, the plastic on the outside was cracked vertically along the side. Although the DI seems to be working fine. Not sure if that crack is of concern?
posted by 141.149.49...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |