1. Just search on my name. Vtsaab also has a good description.

2. As I'm currently stuck in my chair and can't go to work because I seem to have a pinched nerve in my foot, I'll give you them again:

a. Remove the aftmost mount assembly, as it's easy. Don't remove old mount, just clean it with any good cleaner. Wet rubber of old mount with water, as the silicone RTV (room temperature vulcanizing) vulcanizes by absorbing moisture. Fill with a good silcone, I like the 50 year black. I buy it in the caulking gun size and keep it in my refrig when not in use. If you spit on your finger you can smooth the silicone to give a nice finished appearance. Silicone seems not to stick to spit.

b. You can do the forward mount the same way while it's still in the car.

c. If you feel ambitious, you can do the trans mount also. For this one, remove left front wheel and inner fender liner.

d. Let rubber cure overnight. It will probably take a few days for the rubber to completely cure, but the car is drivable after first night.

3. Like I've said in the past, if you're not satisfied with the finished results, you're only out $5.00 worth of silcone.

4. The first mount I did was on my '91 9000 which I did in 1999, and they're still going strong.

Good luck!

• eeuroparts 2pc upper motor mount rocks!!! 15min install, Earthbrown, Sun, 16 Dec 2007 19:37:04
  • SILICONE RUBBER IS JUST AS GOOD, AND IT'S ALMOST FREE, marvinstockman, Tue, 18 Dec 2007 16:16:18
    • Where is link to Marvin's Mount Method?, SavannahDan, Wed, 19 Dec 2007 04:38:02
      • Re: Where is link to Marvin's Mount Method?, marvinstockman, Wed, 19 Dec 2007 07:03:09 <-- Viewing This Message
        • will acrylic/silicone work?, brick8, Tue, 16 Sep 2008 08:12:39
          • Re: will acrylic/silicone work?, marvinstockman, Tue, 16 Sep 2008 08:34:00
            • the answer is...NO, brick8, Thu, 18 Sep 2008 06:51:40
        • Thanks, Marvin.Weather stripping repair good,too., SavannahDan, Wed, 19 Dec 2007 15:20:37
          • Re: Thanks, Marvin.Weather stripping repair good,too., marvinstockman, Wed, 19 Dec 2007 16:11:03
    • 2pc vs. SILICONE vs. std., vtsnaab , Tue, 18 Dec 2007 17:03:09
      • to install cheaper std mount....easy fix for that too.., earthbrown, Thu, 20 Dec 2007 17:42:03
  • Re: eeuroparts 2pc upper motor mount rocks!!! 15min ins, wmtunate, Tue, 18 Dec 2007 06:51:56
  • Agree!, PeterH, Mon, 17 Dec 2007 09:05:30
    • How long have you had this installed?, Bill Homer , Mon, 17 Dec 2007 11:19:58
      • Just checked, PeterH, Tue, 18 Dec 2007 13:45:55
      • Mine disintegrated in one year too, but, Sterling98, Tue, 18 Dec 2007 13:07:37
      • About a year, PeterH, Mon, 17 Dec 2007 11:36:21

No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.

• Prev by Date: You pays your money and you takes your choice, as the, Noel, Wed, 19 Dec 2007 06:07:52
• Next by Date: Re: Reverse Light Sockets, Bill Homer, Wed, 19 Dec 2007 08:21:59
• Main 9000 Bulletin Board

StateOfNine.com

SaabClub.com

Jak Stoll Performance

M Car Covers

Ad Available

The content on this site may not be republished without permission. Copyright © 1988-2024 - The Saab Network - saabnet.com.
For usage guidelines, see the Mission & Privacy Notice.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]

Random Saabnet.com Member Gallery Photos (Click Image)