1985-1998 [Subscribe to Daily Digest] |
[Main 9000 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: Seized-in ABS Sensor! Posted by Gene N [Email] (#1094) [Profile/Gallery] (more from Gene N) on Tue, 14 Sep 2010 10:07:03 In Reply to: Seized-in ABS Sensor!, Simon MacLennan, Tue, 14 Sep 2010 08:18:34 Members do not see ads below this line. - Help Keep This Site Online - Signup |
Well, now that you broke the top off, it should be easy to spray PB-Blaster or Kroil down the side of the hole. After the penetrating oil does its magic, take a pin punch or center punch and tap with a hammer whats left of the sensor, off center and at an angle. Try to get the sensor to rotate in the hole to break it loose. Once that is done, drill a small hole in the sensor and screw a sheet metal screw into the hole. Let the head of the screw stick up enough so that you can pry the sensor out with a screwdriver or grab it with pliers.
Worst case scenario? Push out the axle and pound the sensor down through the hole.
posted by 134.223.116...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.