TCS calibration no contact when entering 971 - Saab 9000 Bulletin Board - Saabnet.com
The banner above is an advertisment - if it asks you to download software, please ignore.
Site News -
7/1: Members: Log In to See Fewer Ads! |
5/28: SAAB Evolutions/TSN T-Shirts $14
[General |
Members |
C900 |
9000 |
NG900 & OG93 |
93 |
95 |
NG95 |
99 |
Sonett |
Vintage Models |
Clubs |
Other Cars |
FAQs |
Gifts |
Member Photo Galleries |
Member Directory |
Classifieds |
Manuals |
*Buddy Registry |
*Mileage Registry |
Polls |
What's New |
Raffle |
Photo of the Month |
Sponsors]
[Main 9000 Bulletin Board | BBFAQ |
Prev by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
TCS calibration no contact when entering 971
Posted by jhutton [Email] (more from jhutton) on Thu, 19 May 2011 07:36:51
Members do not see ads below this line. - Help Keep This Site Online - Signup
found the bellow post, step 5 8A971 is desplayed then the system says no contact, what might be causing this, i have tried, many different ECU,s Throttle bodies, new saftey valve, basicaly everythings been swaped exept the KDW motor
thanks
2) Start engine and bring it to normal operating temperature.
If engine will not operate correctly during warm-up cycle, establish
ISAT communications and enter command Code No. 974 in order to enter
basic data and enable warm-up to be completed.
3) Turn engine off. Connect ISAT to Black diagnostic
connector under passenger�s seat. Ensure Adapter Lead (86 11 048) with
capacitor is installed in test harness. Turn ignition on. Select DIAG,
ONE system from the menu, and enter system No. 3. Check if any fault
codes are stored in memory.
4) If fault codes are present, perform diagnosis as
necessary. See ETS SYSTEM FAULT CODES table. Erase fault codes before
continuing.
5) To enter baseline setting, enter command Code No. 971.
ISAT will display 8A971. After several seconds, display will change to
8D971, indicating that basic setting has been made and system is ready
for calibration.
6) With ignition still on, but engine not running, enter
command Code No. 973. Once TCS CTRL light goes on, start engine, but
do not touch the pedals. Wait for idle to stabilize at 850 RPM. ETS
ECU will raise engine speed to about 3000 RPM.
7) When calibration process is complete, TCS CTRL light will
shut off. Terminate communications, turn engine off, and check if any
fault codes were stored during calibration procedure.
posted by 68.156.15...
http://www.saabnet.com
Posts in this Thread:
- TCS calibration no contact when entering 971, jhutton, Thu, 19 May 2011 07:36:51 <-- Viewing This Message
- Re: TCS calibration no contact when entering 971, dravis9000, Thu, 19 May 2011 22:17:20
- Re: TCS calibration no contact when entering 971, oldsaab, Thu, 19 May 2011 21:40:20
- Re: TCS calibration no contact when entering 971, dravis9000, Thu, 19 May 2011 20:23:05
- Re: TCS calibration no contact when entering 971, dravis9000, Thu, 19 May 2011 19:53:55
Members do not see ads below this line. - Help Keep This Site Online - Signup
Post a Followup
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
StateOfNine.com
|
SaabClub.com
|
Jak Stoll Performance
|
M Car Covers
|
Ad Available
|
Random Saabnet.com Member Gallery Photos (Click Image)
This is a moderated bulletin board - Posting is a privilege, not a right.
Unsolicited commercial postings are not allowed (no spam). Please, no For Sale or Wanted postings, SERIOUSLY.
Classifieds are to be listed in The Saab Network Classifieds pages.
This is a problem solving forum for over 250,000 Saab owners, so expect to see
problems discussed here even though our cars are generally very reliable. This is not an anything goes
type of forum. Saabnet.com has been a moderated forum since 1988. For usage guidelines, see the
Saabnet.com Mission and Purpose Page. Please remember that you are
not anonymous. Site Contact | Site Donations | Other Sites by SP -
Poverty2Prosperity.org | Run Club Menlo Park | ScreenBot
Site Members do not see red text instructions, bottom of the page anchor ads, or box ads.
Click here to see all
the Site Membership Benefits!