1985-1998 [Subscribe to Daily Digest] |
[Main 9000 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: Also need 2 gears Posted by ThomasJ [Email] (#780) [Profile/Gallery] (more from ThomasJ) on Mon, 12 Feb 2018 12:50:55 In Reply to: Also need 2 gears, Mike TX [Profile/Gallery] , Sun, 11 Feb 2018 19:40:34 Members do not see ads below this line. - Help Keep This Site Online - Signup |
I've left 2 emails and have not received anything back and it has been since I posted.
I purchased a used seat lift 'transmission'. The one with the 2 motors ( green and black).
Remove the seat:....4 torx mounting bolts, unplug the 2 connectors,
remove the switch handles, remove the 2 #10 torx screws (1 under the
switches & one accessed from behind the seat, near mounting bolt.
Remove seatbelt, Remove seat.
Remove the green motor and the motor mounting plate from the
transmission. (it exposed the shattered gear).
Take pics at literally each step & you will get the gear and spline set
installed just fine.
Clean out enough grease to insure that there are no leftover 'bits'.
The replacement gear is grey. I'm hoping it is because the plastic is
better(lol).
You will have to remove the worm gear and bearings as an assembly to
facilitate installing the gear/spline set..Add grease.
Thats it!
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.