1950-1966 [Subscribe to Daily Digest] |
Hi guys (and girls),
Im in the process of producing a new 4 bolt hubs for my sonett and 95 to
allow me to mount vented 900 discs and callipers and also use the wide
range of wheels available for the pcd 108 stud pattern.
I will then have a laser cut bracket to mate up the calliper to the disc
and a hose kit to connect it all up.
I have already managed to get a pcd108 drum machined up for the rear -
and could get grooved drums made up etc if anyone is interested.
I have enough people interested in 3 or 4 sets (8 hubs) and at this they
will be about £170ish each
If I get upto 20 units ie. 10 pairs the price should come down
dramatically as most of the cost is in setting up the tooling.
The hubs will be made from hardened steel - NOT ALUMINUM!
Although normal grade steel would be approx £20 cheaper a unit I don’t
think it is worth the saving and would prefer something really strong
Also because the hubs will be much smaller there will still be a
unsprung weight saving which will counter the heavier disc and brake
setup.
Ill be doing all the hard work to get everything to fit eg playing with
bracket sizes and offsets- but its obviously in my interest to get more
hubs made up if possible. Im not a business just an enthusiast!
Let me know if you're interested so I can get numbers together.
If you can email me direct "rob at speedysaab dot co dot uk" as it will save me missing you in the group messages.
ill then setup a group buy on a forum.
Thanks
Rob
posted by 86.128.244...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.