1994-2002 [Subscribe to Daily Digest] |
![]() | [Main NG900 & OG93 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Question On Remaining Plugs/Screws Around Headlights Posted by Frank [Email] ![]() ![]() |
I just finished replacing radiator on my '97 SAAB 900 SE Turbo.
Amzaing "bonding" experience!
I got through the ordeal, changing all hoses and was amazed/pleased
that I had no leftover parts -- or holes! that is until I got to the box with the lights and torx screws. The box had 4 screws for each side.
The engine compartment had two light fixtures and two connectors on each side.
Well, when i went to install the light assemblies, I could only remember/locate three screw holes (two on top of headlght component
and the one used to hold the headlight and side light components together). That leads me with an extra screw for each side.
Also, after installing the two lights in the side light and the one
connector to the headlight component, there was an "extra" electrical connector on each side.
Any ideas where I should "stick" the extra copnnector and screw the
extra torx screws so i can close this project down for good.
Thanks in advance.
Frak
posted by 99.135.100...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |