The banner above is an advertisment - if it asks you to download software, please ignore.
Site News -
7/1: Members: Log In to See Fewer Ads! |
5/28: SAAB Evolutions/TSN T-Shirts $14
[General |
Members |
C900 |
9000 |
NG900 & OG93 |
93 |
95 |
NG95 |
99 |
Sonett |
Vintage Models |
Clubs |
Other Cars |
FAQs |
Gifts |
Member Photo Galleries |
Member Directory |
Classifieds |
Manuals |
*Buddy Registry |
*Mileage Registry |
Polls |
What's New |
Raffle |
Photo of the Month |
Sponsors]
[Main NG900 & OG93 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: What is that bar that goes over left side of engin????
Posted by Dean (more from Dean) on Tue, 8 Apr 2003 12:47:20
In Reply to: What is that bar that goes over left side of engin????, A-C, Tue, 8 Apr 2003 03:01:59
Members do not see ads below this line. - Help Keep This Site Online - Signup
you have a 95SET
I think that you are seeing the steel pipe that routes gasses from the valve cover to the turbo. This is the postitive crankcase ventilation.
I don't know how much it will be in your way. It connects to turbo cast intake elbow down below at its bend with a compression nut of some sort. I never did disturb that.
The hose from the valve cover to that pipe will be swollen and poorly fitting if the original. I tighted it up with nylon tie-wraps. The nylon fitting in the valve cover is very brittle with age. Removing the hoses can bust it. It would be good to have an new one on hand, perhaps the rubber gromlet too. Getting the small hose off of it that goes to a one-way valve and then to the TB is almost impossible. If you are replacing that hose, you will have to carefully cut it away to avoid breaking the nylon. You might be able to just swing the VC back with that hose left connected, or remove the hose from the TB end and leave it connected to the nylon piece fitted to the VC. I renewed that hose, still had the original nylon fitting.
The screws that secure the VC are torx ?#40? You will need a bit to get those out. You can have a look at the cam lobes while you are there and have a peak at the chain and sproket teeth.
Now would be the time to check the torque on the head if you were so inclined. My 95SET never had any head gastet problems and I had my boost jacked up for longer than anyone else with a MBC.
have fun!
95SET (rip)
posted by 208.24.179...
Posts in this Thread:
Members do not see ads below this line. - Help Keep This Site Online - Signup
Post a Followup
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
StateOfNine.com
![](/tsn/xyz/stateofninebutton.gif) |
SaabClub.com
![](/tsn/xyz/scnabutton.gif) |
Jak Stoll Performance
![](/tsn/xyz/jakstollbutton.gif) |
M Car Covers
![](/tsn/xyz/mcarcoversbutton.gif) |
Ad Available
![](/tsn/xyz/buttonavailable.gif) |
![](/tsn/images/tsnmap.gif)
Random Saabnet.com Member Gallery Photos (Click Image)
This is a moderated bulletin board - Posting is a privilege, not a right.
Unsolicited commercial postings are not allowed (no spam). Please, no For Sale or Wanted postings, SERIOUSLY.
Classifieds are to be listed in The Saab Network Classifieds pages.
This is a problem solving forum for over 250,000 Saab owners, so expect to see
problems discussed here even though our cars are generally very reliable. This is not an anything goes
type of forum. Saabnet.com has been a moderated forum since 1988. For usage guidelines, see the
Saabnet.com Mission and Purpose Page. Please remember that you are
not anonymous. Site Contact | Site Donations | Other Sites by SP -
Poverty2Prosperity.org | Run Club Menlo Park | ScreenBot
Site Members do not see red text instructions, bottom of the page anchor ads, or box ads.
Click here to see all
the Site Membership Benefits!