[Subscribe to Daily Digest] |
![]() | [Main Performance Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: SD 2.4 lh chip with or w/out a 300 ohm resistor on amm Posted by Landjet [Email] ![]() ![]() ![]() In Reply to: SD 2.4 lh chip with or w/out a 300 ohm resistor on amm, 91 Aero convertible, Sun, 11 Feb 2007 15:54:15 Members do not see ads below this line. - Help Keep This Site Online - Signup |
Did you change the retard curve vs boost on the distributor vacuum servo? There are several ways to mod the servo so you get more timing retard -- too much advance will cause knocking and then the APC will open the wastegate -- or should -- I would ditch the wastegate spring idea, and use an MBC. I use Brad's modified vacuum servo. I think SD has an AID as well -- there are posts from Notnoel that were very insightful regarding modifying the springs in the servo to provide a better retard curve if you are considering doing it yourself.
Can you post back some of the ignition component history -- what kind of plugs for example.
I wouldn't be concerned about the air temp being too cold.
posted by 152.163.1...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |