[Subscribe to Daily Digest] |
![]() | [Main Performance Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
stock are 23 lb hr at 3.0barfp... Posted by jak [Email] ![]() ![]() In Reply to: Re: Can I use 30 injectors on my 2.0, Dennis, Thu, 29 Jul 2004 20:05:33 Members do not see ads below this line. - Help Keep This Site Online - Signup |
& 21 lb HR at the stock 2.5barfp its the NA injectors that are 19 lb hr at 3.0barfp
24 lb hr injectors arent worth putting in for a gain of 1 lb hr per cylinder over the stock units with the 3.0barfpr
get like 27 lb hr injectors rated at 3.0barfp
use a standard FPR most of our expierence with RRFPRS is that they are un stable verry few tuners would recomend one in a turbo aplication the rate of rise is too high & you end up running rediculously high FP under boost which can actualy cause leanout due to lack of flow (you are better off with bigger injectors & lower FP than hi FP & smaller injectors using a stock fuel pump & plumming)
my 2 cents
JAK
posted by 68.119.22...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |