Date: Tue, 23 Jun 1998 19:14:01 +0000 From: "Martin Bartelds" <btsnopsamv.nl> Subject: Re: Clutch removal tools
On 22 Jun 1998 15:32:07 GMT, William McLeod wrote: :>I understand you need tools to remove a clutch in a 1988 900 8 valve. One :>is to remove the clutch assembly, and the other is to depress the clutch, :>insofar as the clutch cylinder is blown. Any suggestions where I can get :>these parts? Thanks. :> Are you sure the clutch cylinder is fully blown, or is there just some air in the oil ? If so just get the air out. If not: You've got the same problem as I did have a few years ago. How I solved: - Created a small tool to "press" release the clutch. The offical tool is a very big lever with a fork at the end. - Created a small tools to put in the clutch assembly, as soon as the clutch is released. My tools resembles the official one. You could also use a small V-beld or a bougie cable. Maybe you can borow the big lever from a nearby SAAB dealer. Otherwise contact me. Groetjes Martin. ----------------------------------------------------------------------- M.G.N. Bartelds BTSoftware European Shareware Registration & Distribution http://www.btsoftware.com ------------------------------------------------------------------------