Date: Tue, 23 Feb 1999 22:18:48 -0800 From: "Douglas Swank" <dswanknopsamlwebSPAM.com> Subject: Re: Wheels and brakes for 9000CS
Calvin Cheng wrote: > >First the wheels: > >Is the bolt pattern 4x100mm? What about the offset? I would like a set of >Super Aero rims but those are hard to come by. The bolt pattern also seems >to be very odd. What are your recommendations for aftermarket 16" or 17" >rims (I'll probably stick to 16")? Should I fit 225/50ZR16 instead of the >205/55ZR16 that comes on the Aero? Would I experience tire rub problems >because of that? The bolt pattern on all 9000 wheels is 4x108mm. I don't know what the offset is, but I do know that the Super Aeros are 16x6.5". I have heard of people using 225/45-16s instead of the stock 205/55-16s. Be careful if you go with aftermarket wheels that even if the bolt pattern matches that they also center on the hubs properly. Otherwise, you may have a problem with vibration at certain (or all) speeds. >Finally, the suspension: > >I'm only looking for a moderate improvement to the pretty soft stock >suspension. Would the Aero suspension be sufficient? How much would sway >bars help? And what are good sources for them? I replaced the suspension on my '86 9KT with suspension off an Aero with a significant improvement in handling, without a major sacrifice in ride comfort. I looked around quite a bit for other suspension, but had limited success. I would stay away from the Jamex springs at all costs because, to put it bluntly, they are crap. Best of luck with your quest! -Doug