Date: Thu, 10 Feb 2000 17:16:05 GMT From: malcolm532nopsameja.com Subject: Re: 5 speed trans
Recommend taking the drive shafts if you can as the inner joints and cups maybe a different size. BTW the hub nuts are at about 250ft-lbs torque so it maybe easier to take the whole hub assembly from both sides. You can swap the drive cups but you need to check the shim thickness and the relative lengths of the driveshafts Malc (Again:-) Scotland In article <87tvgc$ukm$1nopsam1.deja.com>, malcolm532nopsameja.com wrote: > Yes, but..... > If your turbo was an automatic then you will need other bits and pieces > such as the flywheel and clutch mechanism. > Good luck > Malc > Scotland > > In article <87r23o$edv$1nopsam.snowcrest.net>, > "wgmoore" <wmoorenopsamcrest.net> wrote: > > We have an opportunity to grab a 79 5 speed for $100. It came out of a > > running car -my question is will it fit an 84 900 turbo. The 79 is > N.A.- > > F.I- I'm not to worried about ratios as the car is not really run > hard or > > long.. Just will it fit? > > > > > > Sent via Deja.com http://www.deja.com/ > Before you buy. > Sent via Deja.com http://www.deja.com/ Before you buy.