The banner above is an advertisment - if it asks you to download software, please ignore.
Site News - 4/9 Saab Owners' Convention Day Pass Raffle | 3/26 M Car Covers (by State of Nine)
Date: Mon, 14 Aug 2000 22:10:15 +0930
From: Chris Brittan <cbrittannopsamail.com.au>
Subject: Re: screeching clutch


I have just had clutch problems with my 1985 900 TU3. At first the clutch was really stiff, then no pressure at all (and didn't work - lots of burning smell from clutch). The next day the clutch was back to normal but with a screeching sound that went away with slight pedal pressure. After a short test run the stiff clutch reappeared. Removed the plastic clutch cover and found that the plastic sleeve was melting and had fouled the shaft - resulting in a sticking release bearing after it heated up. As a temporary measure ('cause the sleeve is supposed to keep the shaft clean) I wired the sleeve back so it does not contact the release bearing and cleaned away the melted plastic. The result is a normal clutch with no noises. I did notice that in neutral with engine running the release bearing was at first stationary on the shaft but then started spinning - I don't know whether it should spin or not. adrianb wrote: > I just had my clutch replaced on my 1993 900s by a non-saab > specialist although the guy was European and had worked on saabs > before. The clutch was on it's way out and there was an > intermittent screech due to the thrust bearing. What finally > led to getting the work done was the slave cylinder died and > leaked the hydraulic fluid everywhere (one morning no clutch). > I had hoped that the new clutch would be free from noise > but....guess what! The screech is back and worse than ever. I > called the mechanic but by the time I saw him the noise had > settled down......then of course it starts again. When I did > see him he guessed that the noise had been there before because > he showed me the old thrust bearing and the groove it had worn > on the old clutch. I don't want this to happen again. What > needs to be adjusted. I hope the mechanic will know but realize > it helps if I have some idea! > > Any advice welcome! > > AdrianB > > ----------------------------------------------------------- > > Got questions? Get answers over the phone at Keen.com. > Up to 100 minutes free! > http://www.keen.com

Return to Main Index
StateOfNine.com
SaabClub.com
Jak Stoll Performance
M Car Covers
Ad Available

The content on this site may not be republished without permission. Copyright © 1988-2024 - The Saab Network - saabnet.com.
For usage guidelines, see the Mission & Privacy Notice.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]