Date: Sun, 24 Jul 2005 12:06:56 +0100 From: Grunff <grunffnospam.com> Subject: Re: APC Guage does not move at all...
SuperGlide wrote: > Nope...There is a long whit bit then a gap then a really short white bit, > then a gap then the yellow starts etc....The pointer is stuck in the gap bit > between the whites (even when the engine is turned off it never moves) That means the gauge is disconnected, or stuck (unlikely). > There is a pipe that goes from the rear of the gauge to something under the > passengers dashboard and it all appears to be connected etc...but it cramped > in there so I may have missed something. That pipe comes out through the firewall (bulkhead) and hooks up with the rest of the vacuum tubing near the throttle. You need to locate that end. -- Grunff