2003-2011 [Subscribe to Daily Digest] |
![]() | [Main 93 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Have all equipment in hand, next steps Posted by iveand [Email] ![]() ![]() In Reply to: Re: Chinese Tech2 or other?, Bernie ![]() ![]() |
Bernie,
Thanks again for the explanations. I have in hand now the full kit, including the DB9-RJ45 cable. I am not sure what components are needed for the various tasks, so maybe let me start with the basics:
1. Checking a CEL light code (and resetting).
2. Programming a new key fob.
For both items above if you are willing could you post the basic physical connection needed. Example: for checking a CEL, take Tech2 with PCM card installed in it, and plug to candi? and plug that to the diagnostic port.
They also included a "GoDiag J2534 Nano (usb on one end, diag port on the other). This may be to plug directly to a computer, not using the Tech 2?
I will try some things, but documentation is absent so going in the dark here. Maybe there is a saab specific Tech 2 guide out there somewhere?
Thanks for any help, total noob here!
iveand
_______________________________________ 2006 9-3 Aero SC 2.8T 6-speed (current) 1990 900 SPG 2.0T 5-speed (current) 1985 900 2.0T 5-speed ("DOA" donor car) 1985 900 2.0T 4-door 5-speed (gifted to friend, RIP) 1996 900S 2.3L 5-speed (gifted to friend, RIP?)
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |