1999-2009 [Subscribe to Daily Digest] |
![]() | [Main 95 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: easy enough DIY?? n/m Posted by MontereyAero [Email] ![]() ![]() In Reply to: easy enough DIY?? n/m, jarrald, Wed, 10 Jan 2007 17:25:58 Members do not see ads below this line. - Help Keep This Site Online - Signup |
You bet. Relay K (see link to photo below) is easy to find under the dash, left side after lowering the trim panel somewhat. The relay pulls out so you can see the pin numbers. According to SWEDECAR's posts, pins +30 and 86 are what you're after. Each blade has a small hole it it. I simply inserted a small guage stranded copper wire into the hole(s) and gently reinstalled the relay, with the leads dangling out of the relay box and out of the reinstalled trim panel. Before you mess with the switch, which really is not necessary, but does make life alot eaiser especially if someone else has to drive the car, simply put the ignition in the ON position and touch the two wires together. You should have instant cranking and ignition. As SWEDECAR suggested, I soddered a small momentary-on switch (radio shack) and positioned it near the hood release lever. Good Luck.
posted by 24.23.23...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |