1999-2009 [Subscribe to Daily Digest] |
![]() | [Main 95 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: coolant bypass valve instructions? Posted by B Millar [Email] ![]() ![]() ![]() In Reply to: Re: coolant bypass valve instructions?, B Millar ![]() ![]() |
Otherwise it's pretty straight forward... It's pretty evident what you need to get out of the way just by looking at it. The bungee cord suggestion was very helpful to me. When I loosened the little hose clamp things they were sort of in-grown into the rubber hose so I couldn't slide them back on the hose. I just had to fully extend them and take the hose off with them in place. Then I squeezed the hose at different angles and they came loose. The vacuum line was stuck on the top very nicely so I just cut it off right at the nipple. Make sure you undo that little electrical connector before you start tugging on the hoses. The wires seems brittle and over-reaching on mine. And then that little electrical actuator under the valve confused me a bit but the valve just pulls straight up off of it. There's a clip on the back of the valve. You need some force. That's about it for helpful add-ons to the instructions, it was a very satisfying DIY job.
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |