1999-2009 [Subscribe to Daily Digest] |
here is the WIS section on the sway bar bushing swap:
1) raise car & remove front wheels
2)Turn steering swivel member so the gaiter on steering gear is compressed
3)Remove front bolt from the clamp and slacken the rear bolt a few turns
4)Press the anti-roll bar forwards and lift off the bush mounting
5) remove the bush.
then reverse this to install. I thought it was easier to access this area when the sway bar connecting rods were off. This was on a SoCal 2003 with no rust
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |