1999-2009 [Subscribe to Daily Digest] |
[Main 95 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: main air/vent distr drum help needed Posted by SWEDECAR [Email] (#112) [Profile/Gallery] (more from SWEDECAR) on Tue, 11 Oct 2011 11:46:17 In Reply to: main air/vent distr drum help needed, jarrald, Tue, 11 Oct 2011 10:12:26 Members do not see ads below this line. - Help Keep This Site Online - Signup |
You might be lucky to wiggle and pull the yellow bearing out making the three barbs fold inwards.
I have had one of those bearings cracked inside where it is pushed over the square shaft.
But just a few weeks ago I had an 03 where the motor and yellow bearing was working and it was in fact the white bearing on the other side (driver side) that had popped out of housing allowing the square shaft to wander out of the yellow bearing and disconnect from motor.
Those three white barbs had been pushed in for so long that they did not retract back out when the bearing was pushed back into the housing.
I found a way to stick two o-rings onto the bearing and under the barbs to make them spring out better and bite to the housing.
That seemed to work.
Anders
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.