1999-2009 [Subscribe to Daily Digest] |
![]() | [Main 95 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: '02 95 ARC--AC programming Question Posted by Bernie [Email] ![]() ![]() ![]() In Reply to: Re: '02 95 ARC--AC programming Question, thewheell22 ![]() |
Hello,
Yes 0 Bar on pressure will not allow compressor to turn on. The signal from AC to turn on fans is the following for low speed outside temperature over 22 degrees C, car speed under 38kmh, and pressure over 9 Bar. High kicks in when AC pressure goes over 18 Bar. Don't know how a shop could check that without Tech 2. The pressure in the evaporator is controlled by a expansion valve but the reading for evaporator temperature is a fixed value in Tech 2 after I believe 2001. Early cars had a temp sensor on the evaporator but it was eliminated and a fixed value was programmed in. Could be wrong on the year but it was pretty early. I would try filling it and see what happens. Good Luck, Bernie
_______________________________________ George Riggin Specialty Automotive Current Saabs 1993 900 Turbo Conv. 1993 900 Turbo Conv. Auto 2003 9-3 Conv 2004 9-5 Arc Sedan 2005 9-3 SS 4 door 2005 9-3 SS Conv 2007 9-5 Aero Sedan 1986 900 Turbo Conv A few parts cars also
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |