The banner above is an advertisment - if it asks you to download software, please ignore.
Site News -
7/1: Members: Log In to See Fewer Ads! |
5/28: SAAB Evolutions/TSN T-Shirts $14
[General |
Members |
C900 |
9000 |
NG900 & OG93 |
93 |
95 |
NG95 |
99 |
Sonett |
Vintage Models |
Clubs |
Other Cars |
FAQs |
Gifts |
Member Photo Galleries |
Member Directory |
Classifieds |
Manuals |
*Buddy Registry |
*Mileage Registry |
Polls |
What's New |
Raffle |
Photo of the Month |
Sponsors]
[Main C900 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: squeaking/whining noise when in gear
Posted by JohnK (more from JohnK) on Sun, 22 Dec 2002 17:08:41
In Reply to: squeaking/whining noise when in gear, nt moore, Sun, 22 Dec 2002 16:26:45
Members do not see ads below this line. - Help Keep This Site Online - Signup
If the noise appears when the engine is revved in neutral, i would suspect belts...have you checked them for tightness? The squeal may also be the harmonic balancer/crank pulley. If the crank seal or the oil pump seals leak, the oil gets on the rubber donut that separates the hub of the pulley from the outside.. The way to check this is to scribe a chalk mark across the edges of all four pulleys. If the marks on the pulley closest to the firewall move relative to the other marks, the balancer is shot. The fourth pulley(A/C) is connected directly to the center hub, while the others are mounted on the donut.
The throwout bearing can make assorted rumbles when it goes, but these noises will ususally change depending on whether or not the clutch is engaged. A droning hum in 3-5th gears that stops when you put the clutch in, is typically a bad trans pinion bearing...rebuild time.
Front end clunks are often the balljoints or lower shock bushings, but you can get clunks from tie-rod ends, sway bar bushings, control arm mounts, exhaust mounts. To check the balljoints, you need to jack up the front end with spacers(spark plugs) inserted between the upper control arms and the body to remove the tension from the spring on the balljoints. If you can squeeze the balljoints with a big channel lock and detect slop, they are bad. Tie rod slop is obvious, when you pry on them. The rest of the stuff requires visual inspection.
posted by 68.37.17...
Posts in this Thread:
Members do not see ads below this line. - Help Keep This Site Online - Signup
Post a Followup
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
StateOfNine.com
![](/tsn/xyz/stateofninebutton.gif) |
SaabClub.com
![](/tsn/xyz/scnabutton.gif) |
Jak Stoll Performance
![](/tsn/xyz/jakstollbutton.gif) |
M Car Covers
![](/tsn/xyz/mcarcoversbutton.gif) |
Ad Available
![](/tsn/xyz/buttonavailable.gif) |
![](/tsn/images/tsnmap.gif)
Random Saabnet.com Member Gallery Photos (Click Image)
This is a moderated bulletin board - Posting is a privilege, not a right.
Unsolicited commercial postings are not allowed (no spam). Please, no For Sale or Wanted postings, SERIOUSLY.
Classifieds are to be listed in The Saab Network Classifieds pages.
This is a problem solving forum for over 250,000 Saab owners, so expect to see
problems discussed here even though our cars are generally very reliable. This is not an anything goes
type of forum. Saabnet.com has been a moderated forum since 1988. For usage guidelines, see the
Saabnet.com Mission and Purpose Page. Please remember that you are
not anonymous. Site Contact | Site Donations | Other Sites by SP -
Poverty2Prosperity.org | Run Club Menlo Park | ScreenBot
Site Members do not see red text instructions, bottom of the page anchor ads, or box ads.
Click here to see all
the Site Membership Benefits!