1979-1993 & 94 Conv [Subscribe to Daily Digest] |
[Main C900 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: Need Help desperately: PS pump removal/replacement Posted by Landjet [Email] (#16) [Profile/Gallery] (more from Landjet) on Fri, 16 Jan 2009 20:57:21 In Reply to: Re: Need Help desperately: PS pump removal/replacement, FiremanBob, Fri, 16 Jan 2009 17:28:49 Members do not see ads below this line. - Help Keep This Site Online - Signup |
I don't know the sound....I found mine was vibrating so much that it sent the knock sensor into boost cut. I could feel a vibration on the firewall with my feet, but couldn't see it at idle.
I have read posts about the squeal as described to be rubber against steel as there is separation between the isolater and the crank pin. Hard to describe, but if you mark with white, the crank pulley and AC pulley, and then run the car, the mark should be in the same place. If it has offset, then the pulley is moving on the shaft, therefore, separating itself from the bond. You might try a search on crank pulley. There are lots of posts on the subject.
posted by 205.188.117...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.