1979-1993 & 94 Conv [Subscribe to Daily Digest] |
![]() | [Main C900 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
just a thought, but when you rebuilt the master... Posted by baggsly [Email] ![]() ![]() In Reply to: clutch beeding is killing me, aalto, Sat, 24 Jan 2009 18:40:16 Members do not see ads below this line. - Help Keep This Site Online - Signup |
are you sure you put the seals in in the right direction?
they are usually cupped on one side, and it's important that you have them the right way around otherwise you're not actually having the piston move back when you release the pedal because the seals are preventing it from moving.
if it's a pre-'89 model (with the brake booster, not accumulator), you can check inside the booster and see if there is fluid in there (leaking from m/c bore) which would be a way fluid is escaping without showing leaks. you said there was no leakage but you didn't mention whether or not you've had to top up the hydraulic fluid.
i usually have the bleed container down on the ground, not leading back up to the resevoir, so i don't know if that might be an issue with air perhaps leaking in at the hose end at nipple (slave end) and you seeing that and thinking that it's perhaps air from the system while you're not actually getting air out of clutch.
mark :-)
posted by 96.248.234...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |