1979-1993 & 94 Conv [Subscribe to Daily Digest] |
[Main C900 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: Wiring Harness Repair Question - Picture Posted by vsfoxe [Email] (#1025) [Profile/Gallery] (more from vsfoxe) on Thu, 11 Feb 2010 21:34:40 In Reply to: Wiring Harness Repair Question - Picture, BAAB [Profile/Gallery] , Thu, 11 Feb 2010 20:58:55 Members do not see ads below this line. - Help Keep This Site Online - Signup |
Sort of, but maybe not? I didn't have one iof the same connector in my collection to verify this, but: We know the connectors will slip out of the back, after you push some sort of latching tab, to allow them to slip out. Look into the front where you see the 2 metal connector tabs. You should see a tiny tab (part of the metal connector) which snaps into place, and holds the connector into the plastic, once you insert the connecting tabs past a specific point. It probably looks like a "ramp" going uphill, going away from you. What you need to do is take a small jeweler's screwdriver, and push the tiny lock tab flat in the direction of removal/installation, as you put mild pressure on the wire to pull it out the back. One at a time. Use a magnifying glass if necessary. You'll see the tab, and then it will make sense. Most electrical/electronic plugs use the same principle in one form or another. Good luck.
Vern
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.