1979-1993 & 94 Conv [Subscribe to Daily Digest] |
[Main C900 Bulletin Board | BBFAQ |
Prev by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
there is like a skate board bearing Posted by vvack0matic [Email] (#1443) [Profile/Gallery] (more from vvack0matic) on Sun, 19 Feb 2012 22:15:01 In Reply to: 86 900 turboclutch input shaft, simon, Sun, 19 Feb 2012 21:49:03 Members do not see ads below this line. - Help Keep This Site Online - Signup |
in the middle of the flywheel, the input shaft needs to be pushed into the bearing. with the clutch plate laying on the input shaft its pushing the shaft down just a tad so the back of the shaft isn't lining up to the center of the bearing, the take a small bolt and spin it into the end of the input shaft (where the plastic spinner spins onto the shaft) now with a temporary bolt in the shaft get a hammer, put the end of the handle of the hammer on the end of the bolt and press down hard on the top of the hammer and push the input shaft in at the same time. it will slide right in
posted by 216.74.198...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.