1979-1993 & 94 Conv [Subscribe to Daily Digest] |
![]() | [Main C900 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: Reverse Gear Issue - Need Some Help Posted by Cmyles [Email] ![]() ![]() In Reply to: Reverse Gear Issue - Need Some Help, dave24 ![]() ![]() |
When you replace the actuator lever you must be sure to engage the "finger" into the slot that wraps around the gear. When the actuator lever pivots it slides the gear forward and backward on it's shaft. When the gear is rearward (towards the rear of the car) reverse is selected. When it's forward reverse is not selected. If you failed to get the finger into the slot the lever will pivot but the gear will not slide or engage (it might get pushed rearward but it will then stay there). All this assumes that the gear still has it's teeth. A gear with no teeth can be in position but will not transmit torque of course and I've seen them with no teeth at all. Most likely you've made a mistake in fitting the lever.
posted by 69.131.232...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |