1985-1998 [Subscribe to Daily Digest] |
![]() | [Main 9000 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: Procedure for changing to Gold Contacts on ETB harn Posted by SWEDECAR [Email] ![]() ![]() ![]() In Reply to: Procedure for changing to Gold Contacts on ETB harness?, RayV, Tue, 26 Oct 2004 05:27:35 Members do not see ads below this line. - Help Keep This Site Online - Signup |
First you pull back the rubber boot on the back side of the 7 pin harness connector.
Now you need a flat bladed pick tool that you insert in one of the two slots on the front side on the connector at each pin you want to extract.
Difficult to explain in writing how to do but if you turn the connector toward you and look at the pins, you notice a little opening on each side of each pin. That's where you need to push the pick tool in. It can't be a tapered pick tool since you need to get it in about 1/4" to push a little locking tab.
Actually, if you look at the new connectors that came with the TB you can study the locking tab and see what is needed to get it released.
When you have the tool in place, wiggle it and pull on the wire at the same time, don't pull to hard on the wire you because you might jam the locking tab.
When the wire is out, cut, strip and crimp the new connector on and insert again in harness connector.
Anders
posted by 67.113.8...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |