1985-1998 [Subscribe to Daily Digest] |
![]() | [Main 9000 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: HELP! - No shift after spring change! Posted by nothing but SAAB [Email] ![]() ![]() ![]() In Reply to: Re: HELP! - No shift after spring change!, Bob'sSaab, Sat, 29 Oct 2005 20:49:05 Members do not see ads below this line. - Help Keep This Site Online - Signup |
Could it be that the linkage is out of adjustment since it was shifting ok before you changed the spring, unless you missed something? This is how you could check the adjustment of the linkage:
1. Remove the gear selector lever cover.
2. Loosen the gear selector lever housing nuts with tool 83-91-23 or equivalent.
3. Lift the gear selector lever housing and turn it so the adjusment nuts of the cable will be reachable.
4. Adjust the cable longer or shorter, as required.
5. Assemble the gear selector housing and check the clearance in N and D.
6. The proper setting for the selector cable can be accomplished by adding or removing shims at the transaxle case end of the cable. A maximum of 3 shims may be used.
Hope this helps.
Nothing but SAAB
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |