1969-1984 [Subscribe to Daily Digest] |
![]() | [Main Saab Model 99 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: Dribbling out a particular PORT (not injector)... Posted by 79-900t [Email] ![]() ![]() In Reply to: Dribbling out a particular PORT (not injector)..., BAAB ![]() ![]() |
I disassembled, cleaned and reassembled the fuel distributor for my 76 99ems a few years back. The inside contained a spring and orifice at each injector port, and metal gasket/diagram between the upper and lower half. The car had sat for several years and developed a vanish and light rust in some areas internally. I carefully cleaned the fuel distributor internals, replaced the springs from a second fuel distributor I had laying around (Lambda). Since this is a metal to metal seal it is extremely important to not scratch the mating surfaces and be absolutely clean when reassembling to prevent leaking.
The below company remanufactures and has some good general information on Bosch fuel distributors:
http://www.jaytanindustriesinc.com/
Good luck,
Bruce
76 99 ems
79 900t
80 900t
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |