[Subscribe to Daily Digest] |
![]() | [Main Performance Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
back to the ol drawing board :-) Posted by jak [Email] ![]() ![]() |
so ..... I liked snipes idea of the double 900 IC with long tanks
the core would be 16X2.5 inch which would flow aprox 450CFM I would cut the end tanks as to keep away from the core that way when welding it up Id avoid the problems I had with with the other IC I tried to do although the friggin 900 IC core tubes are as thick as the end plates on the volvo cores I was using so burning holes in the core tubes will be much less of a worie
Ill make tapered tanks running the upper pipe along side the IC down & out the front inboard of the tow hook the bottom tank outlet will go strait out to the left (sitting in the car) than use a 90* hose to go out front inboard of the tow hook (the idea being to come up with something which requires as lil cutting as possible) than both pipes would go around the front of the tow hooks & up into the engine bay thru the grilles left & right (yeah allot of pipe but mabey using 2.25 inch) or mabey Ill just say screw it & take the shortest path possible I also have something else up my sleave as well Ill share later :-)
none the less by the end of the summer Id like to show a dyno sheet of 250WHP using the volvo setup with my chip & a home made IC setup (bang for the buck HP)
TSN ROCKS! you all have a safe & fun 4th weekend
JAK
posted by 68.119.22...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |