1999-2009 [Subscribe to Daily Digest] |
[Main 95 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Even more troubleshooting but no fix yet Posted by HappyValleySaab [Email] (#2037) [Profile/Gallery] (more from HappyValleySaab) on Wed, 23 Nov 2016 15:35:03 In Reply to: Well here is where I am now a little more figured out, HappyValleySaab [Profile/Gallery] , Wed, 23 Nov 2016 13:08:54 Members do not see ads below this line. - Help Keep This Site Online - Signup |
I got to messing with the driver's side again. If you go through the floor vent with a long flat head screw driver you can turn the drum to switch from vent to floor to defrost. It looks like the driver's side should be the one to turn this drum but it doesn't. When I calibrate the ACC the motor turns the yellow piece inside the drum but the drum doesn't turn. The entire yellow piece (the one that is normally broken) is turning from the motor to the drum but the drum isn't turning.
My assumption is that however this piece is connected to that drum is broken off inside and that is why the drum isn't turning. Does that sound like it could be the problem?
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.