1979-1993 & 94 Conv [Subscribe to Daily Digest] |
![]() | [Main C900 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Three locations to check Posted by Dana [Email] ![]() ![]() In Reply to: Clutch pedal flops and brake fluid vanished, goat43, Mon, 23 Sep 2002 09:50:10 Members do not see ads below this line. - Help Keep This Site Online - Signup |
1. Feel and look for a wet flex hose from tubing to the slave cylinder near the slave unit. Hose to Tube fittings will start to leak with age...if so change clutch line.
2. Look for fluid coming out of the end of the master cylinder under the dash....would run down inside the inside of the firewall or onto the top of the foam of the underdash cover panel...if leaking you will have quite a bit of fluid by now on the floor. If so, replace master cylinder or get a seal repair kit.
3. Look for fluid spot on the ground just under the front of the engine just under the small hole in the bottom of the flywheel cover. If here then slave unit seals are bad...this generally is the worst case since it is about the same labor to do the entire clutch....
posted by 129.57.11...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |