1985-1998 [Subscribe to Daily Digest] |
![]() | [Main 9000 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: Another 93' CSET TCS victim :(; Tech2 codes deciphering Posted by SWEDECAR [Email] ![]() ![]() ![]() In Reply to: Another 93' CSET TCS victim :(; Tech2 codes deciphering, Roman, Wed, 23 Jul 2003 17:35:46 Members do not see ads below this line. - Help Keep This Site Online - Signup |
77594 Voltage at pedal or throttle sensor incorrect.
35380 (No good) could it be 35780 maybe? voltage at throttle sensor incorrect
35781 Voltage at pedal sensor incorrect
E7590 Pneumatic throttle system or sensor faulty
These are codes that I haven't seen before, and therefore I beleive that it's something that the shop might have created while doing the tranny job. Maybe they disconnected some cable harness and turned on ignition while it was loose. Codes needs to be reset by ISAT or Tech 2 for the system to work properly.
It's extremely important that the TCS gets calibrated when a tranny job have been done on an auto box and after the kickdown cable have been adjusted.
It is also extremely important that the kick down wire is adjusted correctly, since the kick down function is part of the TCS system.
And as always, make sure you have the latest bleeder valve and new vacuumhoses and red/white check valve. After that it might be a throttle body problem.
Anders
posted by 67.113.8...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |