Re: Front engine mount - Saab 9000 Bulletin Board - Saabnet.com
The banner above is an advertisment - if it asks you to download software, please ignore.
Site News -
7/1: Members: Log In to See Fewer Ads! |
5/28: SAAB Evolutions/TSN T-Shirts $14
[General |
Members |
C900 |
9000 |
NG900 & OG93 |
93 |
95 |
NG95 |
99 |
Sonett |
Vintage Models |
Clubs |
Other Cars |
FAQs |
Gifts |
Member Photo Galleries |
Member Directory |
Classifieds |
Manuals |
*Buddy Registry |
*Mileage Registry |
Polls |
What's New |
Raffle |
Photo of the Month |
Sponsors]
[Main 9000 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: Front engine mount
Posted by Victor (more from Victor) on Tue, 5 Jul 2005 06:52:43
In Reply to: Front engine mount, yaofeng, Mon, 4 Jul 2005 20:40:15
Members do not see ads below this line. - Help Keep This Site Online - Signup
I don't think you need to lift the engine from two points. I was looking yesterday at mine (95 Aero), while trying to remove axle carrier bracket.
Mount design is different then on earlier models( mount is secured with bolt instead of nut) which doesn't require high lifting. Just try to slide old mount out when 3 bolts and 2 screws are removed. Here is procedure. Note, that you have to move lifting eye from left to right side of the engine.
I'm just using tranny jack borrowed from fellow TSNer Urby to lift an engine-I believe I need an inch of clearence.
REMOVAL
1. Install the engine lifting beam (83 93 977), or equivalent over the engine bay and attach a hook to the RH eye on the engine.
2. Remove the right front wheel.
3. Remove the front section of the fender liner.
4. Remove the bolt securing the bracket to the mounting and raise the engine slightly.
5. Undo the bolt securing the bracket to the block and lift off the bracket.
6. Undo the bolts securing the mounting to the subframe and remove the mounting.
INSTALLATION
1. Install the engine mounting.
2. Install the bracket for the oil pipe into the groove in the engine bracket and bolt the engine bracket to the block.
3. Lower the engine onto the mounting and remove the lifting beam.
4. Install the bolt securing the engine bracket to the engine mounting.
5. Install the fender liner.
6. Install the wheel and torque the bolts to 130 Nm (96 ft. lbs.) .
posted by 66.216.138...
Posts in this Thread:
Members do not see ads below this line. - Help Keep This Site Online - Signup
Post a Followup
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
StateOfNine.com
![](/tsn/xyz/stateofninebutton.gif) |
SaabClub.com
![](/tsn/xyz/scnabutton.gif) |
Jak Stoll Performance
![](/tsn/xyz/jakstollbutton.gif) |
M Car Covers
![](/tsn/xyz/mcarcoversbutton.gif) |
Ad Available
![](/tsn/xyz/buttonavailable.gif) |
![](/tsn/images/tsnmap.gif)
Random Saabnet.com Member Gallery Photos (Click Image)
This is a moderated bulletin board - Posting is a privilege, not a right.
Unsolicited commercial postings are not allowed (no spam). Please, no For Sale or Wanted postings, SERIOUSLY.
Classifieds are to be listed in The Saab Network Classifieds pages.
This is a problem solving forum for over 250,000 Saab owners, so expect to see
problems discussed here even though our cars are generally very reliable. This is not an anything goes
type of forum. Saabnet.com has been a moderated forum since 1988. For usage guidelines, see the
Saabnet.com Mission and Purpose Page. Please remember that you are
not anonymous. Site Contact | Site Donations | Other Sites by SP -
Poverty2Prosperity.org | Run Club Menlo Park | ScreenBot
Site Members do not see red text instructions, bottom of the page anchor ads, or box ads.
Click here to see all
the Site Membership Benefits!