1985-1998 [Subscribe to Daily Digest] |
Except I think you do not need to remove the rotor nor the caliper. No need to touch the tie-rod end either. If I remember correctly after loosening and removing the axle which requires the two bolts on the strut removed and separating the inner drive you can get to four allen head bolts to get the bearing out. I used a 3/8" to 1/2" adapter for the 8 mm allent socket with a 1/2" drive 18" pry bar to get the bolt off.
posted by 96.56.19...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |